Sharing The Installation Process, Color-coated Steel Coil.

Sharing The Installation Process, Color-coated Steel Coil.

Sharing the installation process, color-coated steel coil. 1. Construction procedures Color-coated color-coated board installation and construction procedures: embedded connectors--vertical wall reinforcement---installation of wall panels--board seam treatment 2. Construction points The most...
Pošalji upit
Opis

Sharing the installation process,Color-coated Steel Coil. .

1. Construction procedures

Color-coated color-coated board installation and construction procedures: embedded connectors--vertical wall reinforcement---installation of wall panels--board seam treatment

2. Construction points

3. Construction precautions

(1) Before starting work, check whether the color-coated color-coated plate profiles meet the design requirements, whether the specifications are complete, and whether the colors are consistent

(2) The supporting frame (i.e., wall reinforcement) should be treated with anti-corrosion, fire-proof, and anti-rust treatment. In particular, attention should be paid to anti-rust treatment at the trimmed and punched areas of the color-coated board to improve its durability and ensure the decorative effect.

(3) The positions of embedded parts and wall reinforcements should be consistent with the specifications and dimensions of color-coated boards and special-shaped boards to reduce the secondary processing of materials at the construction site.

(4) The surface of the wall after construction should be flat, with tight joints, reliable connections, and no lifting or curling.

1. Install the fixings and fix them on the purlins with self-tapping screws, which are found on each purlin.

2. Place the color-coated board on the fixed fixture, then compact it with the center rib of each fixture and the bottom groove of the inner rib, and make them fully mesh.

3. Use steel pipes to set up two 4m×3m scaffoldings. Each frame is equipped with 4 wheels for easy pushing.

4. First install the inner layer of the roof. According to the technical requirements, each crest is fixed with 30mm long special self-tapping screws. The color of the screw caps is consistent with the color of the color plate.

5. Lay the insulation cotton and seal the joints of the insulation cotton with special tape.

Popularne oznake: sharing the installation process, color-coated steel coil., China, suppliers, manufacturers, factory, customized, price, in stock, free sample

Можда ти се такође свиђа
Pošalji upit
Kontaktirajte nas
    • Мобилни: +8613280669863

    • Мобилни: +8613053383358

    • ВхатсАпп: +8613280669863

    • ВхатсАпп: +8613053383358

    • Email: sales@jingtaicoils.com

    • Адреса: Индустријски парк Дианзи, бокс, провинција Схандонг, Кина.

(0/10)

clearall